Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Air Quality & Sanitizing for Crown Heights Homeowners
That musty smell when the heat first comes on, the dust that settles on the windowsill a day after you wipe it, the tickle in your throat every time the system kicks in – those aren’t things you have to live with. In Crown Heights, where so many homes run on older forced-air systems and radiators that share ductwork with humid basements, air quality problems tend to build quietly and then show up all at once. We fix the source, not the symptom. Our technicians have up to 8 years of experience with professional-grade equipment from Rotobrush, Nikro, Abatement Technologies, Honeywell and Aprilaire, and we handle cleaning, sealing, sanitizing and component install on one visit. We can often schedule same-day appointments in Crown Heights. Call (833) 754-9186 and describe what you’re seeing or smelling.
Clean ducts are only half the job. Filters and surfaces matter, but so does what lives on them after a mold event, a renovation, a long-idle system, or years of pets and cooking smoke. That’s where our air quality & sanitizing work comes in, and it’s why we treat it as its own service rather than a spray-on afterthought.
What Our Air Quality & Sanitizing Service Includes
Every sub-service below can stand alone or be combined with a full Air Duct Cleaning Crown Heights visit. We’ll tell you honestly which ones your system actually needs.
Mold Treatment
Mold grows in ductwork where condensation, high indoor humidity or a slow leak keeps surfaces damp. You’ll usually notice it as a musty, earthy smell that gets worse when the system runs, or as dark speckling around supply registers. We fog the affected sections with an EPA-approved antimicrobial, run HEPA filtration on Abatement Technologies equipment to contain dislodged spores, and treat the source so it doesn’t return the next humid week. If a moisture problem is feeding it, we’ll say so – treating mold without fixing the moisture behind it wastes your money.

Bacteria Sanitizing
Bacteria colonize evaporator coils, drain pans and the damp interior of duct runs, often after flood damage, a neglected HVAC unit, or a long stretch of high humidity. Symptoms show up as recurring colds, throat irritation, or a smell you can’t place. We sanitize the coil, pan and duct interior with a professional-grade product applied through rotary brush and fogging equipment, not a hardware-store spray. Our technicians verify coverage with a visual inspection before, during and after the application.

Odor Removal
Pet odors, cooking smoke, tobacco, and musty smells from old building systems settle into duct lining and insulation where a room spray can’t reach. When ventilation is short and apartments share walls, those odors cycle through the building instead of leaving. We clean the buildup from the duct surfaces first, then apply an odor-neutralizing treatment to the source. If the smell comes from a dryer vent or a leaking joint, don’t worry about masking it – we’ll point to the real cause.

UV Light Installation
A UV-C lamp installed near the evaporator coil keeps the coil and drain pan sanitized between cleanings by disrupting the growth of mold, bacteria and other microbes. It’s most useful in homes where humidity runs high, where someone in the household has asthma or allergies, or where the coil is hard to reach for regular cleaning. We install a properly sized unit for your air handler and check airflow before and after so the lamp doesn’t restrict it.
Air Purifier Install
Whole-home purifiers like Honeywell and Aprilaire media filters and electronic units are installed in the return air stream to capture particles far below what a basic filter will catch. We match the purifier to your blower’s capacity so it doesn’t choke airflow, which is a common mistake when a unit is oversized. We integrate Honeywell and Aprilaire components directly with your existing system and walk you through replacement filter intervals.
Allergen Reduction
Dust mites, pollen, pet dander and mold spores all collect in the duct system and re-circulate through every room. Allergy season in Crown Heights – from spring tree pollen to the late-summer weed pollen – makes this obvious for anyone with seasonal symptoms. We combine cleaning, sealing of leaking joints, and a correct MERV-rated filtration setup so allergens are captured rather than blown back into living space. It won’t cure allergies, but it can remove a big daily exposure from the air at home.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for Air Quality & Sanitizing
We work with Rotobrush rotary brush systems and Nikro HEPA-rated vacuums because both keep dislodged debris inside the equipment instead of in your living room. On heavily contaminated jobs, Abatement Technologies filtration lets us run containment-level control – the standard you want when mold or post-renovation debris is present. Our technicians have up to 8 years of experience matching the equipment to the contamination level, which matters more than which brand name is printed on the housing.
For ongoing air quality, we install and service Honeywell and Aprilaire components: media cabinets, electronic air cleaners, and humidity control. When a Honeywell media cabinet’s filter is undersized for airflow or the Aprilaire unit hasn’t had a filter change, it becomes a pressure problem rather than a help, and we can check and correct that as part of the visit. Whether you have Honeywell, Aprilaire or any other make, we can help.
Signs You Need Air Quality & Sanitizing Right Now
- A musty or earthy smell when the system runs. This usually points to mold or bacteria in the coil, pan or duct lining. Not every smell means a health problem, but it does mean something is growing or degrading in the system.
- Dust returning within a day or two of cleaning. A sealed system shouldn’t reseed every flat surface that fast. It usually means leaking joints, loose boots, or a return that’s pulling from an unintended source.
- Worsening allergy or asthma symptoms at home. If symptoms are better when you’re away from home and worse after the system has been running, indoor air is likely a contributor.
- Recent renovation, water damage or flood. Drywall dust, paint fumes, insulation fibers and moisture all end up in the ducts and stay there. Cleaning after these events prevents long-term contamination.
- Cold or stuffy rooms with no obvious cause. Restricted airflow from dirty coils, blocked returns or a purifier sized wrong can make rooms uncomfortable even when the system runs fine.
Our Air Quality & Sanitizing Process – Step by Step
- 1
Full inspection and airflow check. We start with a camera inspection of the main duct runs, check the coil and pan for organic growth, and measure static pressure at the air handler. That baseline tells us whether sanitizing alone is enough or whether the system also needs duct repair and sealing or a deeper HVAC cleaning.
- 2
Source removal and containment. Debris, build-up and contamination get pulled out using Rotobrush rotary brush systems and Nikro HEPA vacuums. On heavily contaminated systems, we set up Abatement Technologies negative-air filtration so contaminants are not released into the home during the work.
- 3
Sanitizing and treatment. We apply mold and bacteria treatments with fogging equipment after removal, so the treatment reaches surfaces that cleaning alone can’t strip down. We do not apply treatments over uncleaned surfaces, because they don’t work that way.
- 4
Installation of air quality components. UV lamps, purifiers and upgraded filtration are installed at this stage if you’ve chosen them – after cleaning, so they’re mounted on clean surfaces and sized correctly for your blower. We also handle Honeywell and Aprilaire filtration installs to keep performance steady.
- 5
Verification and photo documentation. We re-check static pressure and airflow, confirm every register is re-sealed, and walk you through before-and-after photos of your system. You see exactly what we cleaned and what we installed.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Air Quality & Sanitizing Cost in Crown Heights?
A typical sanitizing service in Crown Heights runs $300 – $650 depending on the size of the system and how much contamination we find. A combined mold treatment and bacteria sanitizing job usually runs $500 – $1,200 for a whole-home system where growth is confirmed in the coil and duct runs. UV light installation typically runs $350 – $750 including the unit and mounting, and a whole-home purifier install runs $600 – $1,400 depending on the model and whether a media cabinet is added. All prices are estimates; the written estimate sets the final price.
What affects the price: how many duct runs the system has, the size of the air handler, how much contamination is present, and whether repair or sealing is needed before sanitizing will hold. If you’re adding a UV lamp or purifier, the model and filtration level are the main factors.
How to avoid overpaying: ask what’s included in the sanitizing step (treatment product, coverage, verification) and whether the price is whole-system or per-vent. Ours is one flat price per system agreed before work starts, and we give you before-and-after photos so you can verify the work was actually done. The free estimate includes a full inspection and a clear breakdown of which services you actually need versus which you don’t.
Air Quality & Sanitizing Near Crown Heights – Our Service Area
We serve Crown Heights and the surrounding neighborhoods, including East Flatbush, Williamsburg, Prospect Heights, Bedford-Stuyvesant, Flatbush, Brownsville, Clinton Hill, Park Slope, Fort Greene, Kensington and Bushwick. Our neighbors in air quality & sanitizing in East Flatbush and air quality & sanitizing in Williamsburg get the same full inspection and photo documentation. If you’re not sure whether you’re in our service area, call and we’ll confirm before we schedule.
Serving Crown Heights, NY – Our Local Coverage Area
We serve Crown Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Air Quality & Sanitizing in Crown Heights
It’s the treatment of the surfaces inside your HVAC system that ordinary duct cleaning doesn’t address – the coil, drain pan, duct lining and insulation where mold, bacteria and odor-causing buildup live. Cleaning removes the debris; sanitizing kills or neutralizes what’s left on the surfaces after cleaning. We also install ongoing components (UV lamps, purifiers, better filtration) so performance holds between cleanings. It’s a separate service from a standard dryer vent cleaning, which we also offer for fire safety.
A standard sanitizing visit takes about 2 to 3 hours for a single-family home, and a combined mold treatment with UV installation runs 3 to 5 hours. Larger systems, heavy contamination, or a separate purifier install extend the time. We give you a realistic time window when we confirm the appointment.
Typical sanitizing runs $300 – $650, mold treatment with bacteria sanitizing runs $500 – $1,200, and UV or purifier installs run $350 – $1,400 depending on the component. Final pricing depends on system size, contamination level, and whether repair or sealing is needed first. Call (833) 754-9186 for an exact quote – estimates are free.
Cheap sanitizing quotes usually skip the source removal step and fog a treatment product over dirty surfaces, which does very little. Others quote per-vent or per-register and pad the total. We give one flat price per system, agreed before work starts, and we photograph before and after so you can see the difference.
Yes. We install and service Honeywell media cabinets and Aprilaire purifiers and humidity control, and we can check whether an existing unit is sized correctly for your blower. Whether you have Honeywell, Aprilaire or any other make, we can help. Call (833) 754-9186 to schedule a free estimate.
Same-day appointments are often available for air quality work in Crown Heights. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday – we are closed Saturday. A call outside dispatch hours is booked into the next opening. Call (833) 754-9186 to see what’s available.
We stand behind the work with a written warranty on the installation of components like UV lamps and purifiers, and we verify system performance before we leave. For preparation, clear access to your air handler, registers and returns, and secure any pets during the visit. Call (833) 754-9186 with any questions before your appointment – estimates are free.
Schedule Your Air Quality & Sanitizing Service in Crown Heights Today
Air you can’t see is still air you breathe, and in Crown Heights it’s worth getting right. Call (833) 754-9186 for a free, no-obligation estimate on air quality and sanitizing, and one of our technicians with up to 8 years of experience will walk you through exactly what your system needs. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One flat price per system, agreed before work starts, with before-and-after photos of your own system.
Written by the team at Air Duct Cleaning Crown Heights.