Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted HVAC Cleaning for Crown Heights Homeowners
Most Crown Heights homeowners think about their ducts and forget the machinery the ducts feed. The evaporator coil, the blower, the air handler, the condenser outside – that’s where the air actually gets moved, cooled, and pushed through your apartment or brownstone. When those parts load up with dust and debris, your system works harder, your rooms cool unevenly, and the dust you keep wiping off the sill keeps coming back. Our technicians have up to 8 years of experience with professional-grade equipment from Rotobrush, Nikro, and Abatement Technologies, and we handle the full indoor air system in one visit. Call (833) 754-9186 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What Our HVAC Cleaning Service Includes
Cleaning the ducts without cleaning the equipment is only half the job. Our HVAC cleaning work covers every component that moves or conditions air inside your home.
Evaporator Coil Cleaning
The evaporator coil is the finned coil inside your air handler where refrigerant absorbs heat from the air. When dust and lint coat those fins, the coil can’t pull heat out of the air, so the system runs longer to reach the same temperature. We clean the coil without bending fins, using coil-safe cleaners and controlled rinsing so the condensate drain stays clear. If your Crown Heights home’s air feels clammy or the system never quite catches up, a dirty evaporator coil is often why.

Blower Cleaning
The blower wheel is the fan that pushes conditioned air through your ductwork. Its blades are cupped, and over time they collect a felt-like layer of dust that throws the wheel out of balance and cuts airflow. We pull the blower assembly, clean the wheel and housing, and check that it spins freely before it goes back. A clean blower is one of the quietest improvements you’ll notice – less vibration, steadier airflow, and less strain on the motor.

Condenser Cleaning
The condenser is the outdoor unit that releases heat pulled from inside your home. In Crown Heights, condenser coils collect pollen, cottonwood, grit, and the general dust of a dense neighborhood, and a clogged condenser makes the compressor work harder in exactly the hot weather when you need it most. We clean the coil, clear the fins, and check the surrounding clearance so air can move through the unit. This is straightforward work that protects the most expensive part of the system.

Air Handler Cleaning
The air handler cabinet houses the blower, coil, and often the filter rack. It’s a closed box that traps dust, and in older buildings the interior lining can hold years of buildup. We clean the cabinet interior, the drain pan, and the filter rack, and we check the pan for standing water that invites mold. If your mechanical closet smells musty when the fan runs, the air handler is where that smell usually starts.
Heat Exchanger Cleaning
The heat exchanger is the component that separates combustion gases from the air you breathe in a gas-fired system. It collects soot and dust on the outside, and in a forced-air furnace any crack or corrosion in it is a genuine safety concern. We clean the accessible surfaces and inspect for visible damage, then tell you plainly what we found. If we see something that needs a licensed heating contractor, we’ll say so – we don’t repair gas components.
Coil Treatment
After cleaning, we apply a coil treatment that slows how quickly dust and biological growth return to the fins. It’s a light protective coating, not a perfume or a masking spray, and it’s especially useful in homes with pets or with a history of musty smells. For owners who want sustained improvement, we can pair this with Honeywell or Aprilaire filtration and air quality components that keep the system cleaner between cleanings.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for HVAC Cleaning
We work on all major makes of residential HVAC equipment, and a few brands come up often enough that we know exactly where they wear. Nikro HEPA-rated vacuum equipment is what we use to capture what we dislodge – dust pulled off a blower or a coil gets trapped, not blown back into your living room. For owners who want ongoing filtration, we stock and install Honeywell controls and Aprilaire filter housings that connect a cleaning to a real, lasting air quality improvement.
Abatement Technologies air filtration equipment lets us run containment-level cleaning in units with heavy contamination, which matters after a renovation or a long-neglected system. We service the equipment, we don’t just dust it. And whether you have a common brand or something older and less familiar, we can help you get it clean and keep it that way. If you’re unsure what you have, a photo of the nameplate is enough for us to tell you.
Signs You Need HVAC Cleaning Right Now
- Dust returns within days of cleaning. If you dust a shelf and it’s gray again by the weekend, the system is redistributing what it holds. That means the blower, coil, or ductwork is loaded and needs attention.
- Musty or stale smell when the fan runs. A smell that appears the moment the air comes on points to the air handler, drain pan, or coil. It’s worth cleaning before it becomes a bigger mold problem.
- Uneven cooling room to room. When one room cools and another stays warm, restricted airflow from a dirty blower or coil is a common cause. Cleaning restores the airflow the system was designed for.
- Higher energy bills with no change in use. A dirty coil and blower make the system run longer to do the same job. If your bill has crept up, the equipment is a good place to look.
- Allergy symptoms that get worse indoors. If sneezing and congestion follow you inside, the air handling equipment may be part of the picture. Cleaning and proper filtration can reduce what’s circulating.
Our HVAC Cleaning Process – Step by Step
- 1
Inspection and photos. We open the air handler and inspect the coil, blower, drain pan, and duct connections, taking before photos so you can see what we see. We show you the images and explain what we found before any work starts.
- 2
Containment and protection. We set up negative-air containment with Abatement Technologies equipment and floor protection so dust and debris stay in the work area. This is the difference between cleaning equipment and a shop-vac and a promise.
- 3
Mechanical cleaning. We use Rotobrush rotary brush systems on the ducts and controlled cleaning on the coil and blower, with Nikro HEPA vacuums capturing everything we dislodge. Brushes reach surfaces suction alone can’t.
- 4
Repair and sealing. If we find leaky joints, torn flex, or disconnected runs, we fix and seal them on the same visit. Clean ducts that leak just pull attic or basement air back in.
- 5
Treatment, reassembly, and verification. We apply coil treatment where it helps, reassemble the system, confirm airflow and drainage, and take after photos. You get a clear picture of what changed before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does HVAC Cleaning Cost in Crown Heights?
A typical HVAC cleaning in Crown Heights runs $300 to $700, depending on how many components you have and how heavily they’re loaded. A single air handler with coil and blower cleaning usually lands at the low end; a full system with condenser, heat exchanger, and coil treatment runs higher. Ductwork is priced separately, and repair or sealing is quoted only if we find a problem.
What affects the price: the number of systems (a two-unit brownstone costs more than a single-family), the condition of the equipment, and whether you add filtration like an Aprilaire or Honeywell housing. How to avoid overpaying: ask for a written, itemized estimate per component before anyone starts, and be wary of a low headline number that grows once the technician is inside. We give one flat price per system agreed before work begins, and that written estimate sets the final price. Call (833) 754-9186 for a free estimate.
HVAC Cleaning Near Crown Heights – Our Service Area
We serve homeowners across Crown Heights and the surrounding neighborhoods, including Prospect Heights, Bedford-Stuyvesant, Clinton Hill, Flatbush, and Brownsville, as well as HVAC cleaning in East Flatbush and HVAC cleaning in Williamsburg. If you’re not sure whether we reach your block, call and we’ll tell you. Most visits are scheduled within a day or two of your call.
Serving Crown Heights, NY – Our Local Coverage Area
We serve Crown Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – HVAC Cleaning in Crown Heights
HVAC cleaning is cleaning the equipment that moves and conditions your air – the evaporator coil, blower, air handler, condenser, and heat exchanger – not just the ducts. It removes the dust and buildup that reduce airflow and efficiency. We treat it as full-system work, because clean ducts with a dirty coil still leave you with poor air. Call (833) 754-9186 for an exact quote – estimates are free.
A typical single-system cleaning takes two to four hours, depending on how many components we’re servicing and how much buildup there is. A larger home or a system with repairs can run longer. We give you a time estimate when we book and confirm it on arrival. Call (833) 754-9186 to schedule.
Most HVAC cleanings here run $300 to $700, depending on components, condition, and whether you add filtration. We quote one flat price per system before work starts, and the written estimate sets the final price. There’s no surprise add-on once we’re inside. Call (833) 754-9186 for a free estimate.
Yes – we work on all major residential makes, and we’re familiar with common systems across Crown Heights. We use professional-grade equipment from Rotobrush, Nikro, and Abatement Technologies, and can install Honeywell and Aprilaire filtration. If your unit is unusual, a photo of the nameplate is enough to confirm. Call (833) 754-9186 with the make and model.
Same-day service is often possible depending on the schedule. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday – we’re closed on Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday. Call (833) 754-9186 to check availability.
We stand behind the work we perform, and we’ll walk you through what was done before we leave. If something isn’t right with the cleaning, tell us and we’ll address it. We’re clear about what’s covered rather than promising a blanket guarantee. Call (833) 754-9186 with any questions.
Clear access to your air handler and any return grilles, and move breakables away from the work area. Secure pets in a separate room while we work. Turn the system off before we arrive if you can, and let us know about any known issues or recent renovations. That’s all we need to get started.
Schedule Your HVAC Cleaning Service in Crown Heights Today
If your system is running hard or your air doesn’t feel clean, the equipment is the place to start. We inspect, clean, repair, and seal in one visit with professional-grade tools, and you get photos before and after. Call (833) 754-9186 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday. You can also start with air duct cleaning Crown Heights or add dryer vent cleaning to the same appointment.
Written by the team at Air Duct Cleaning Crown Heights.