Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Duct Repair & Sealing for Crown Heights Homeowners
If your Crown Heights apartment or brownstone runs dusty no matter how often you clean, or one bedroom never seems to heat the way the rest of the place does, the ductwork itself is often the culprit. Leaky joints, torn flex runs, and failing mastic let conditioned air escape into wall cavities and pull attic and basement dust into your living space. Our technicians have up to 8 years of experience finding those failures with a rotary brush inspection and HEPA-rated vacuum equipment from Nikro, so the diagnosis is verifiable rather than a guess. We handle air duct cleaning in Crown Heights and the repair work on the same visit. Call (833) 754-9186 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Duct Repair & Sealing Service Includes
Clean ducts are only half the job. A system that pulls in unfiltered air through a cracked seam is going to keep reintroducing the same dust and allergens you just paid to remove. We seal, patch, and insulate the actual duct runs so the cleaning holds up over time. Here’s what each piece of the work involves.
Duct Sealing
Duct sealing closes the gaps between duct sections, at elbows, and where runs connect to the plenum so air stays inside the system instead of bleeding into walls and crawl spaces. You need it whenever your energy bills climb without explanation or rooms nearest the unit are noticeably warmer or colder than rooms farther away. We pressure-check the trunk and branch runs, then seal joints with the appropriate method for the duct material we’re working with, so the fix fits the system rather than being a generic wrap.

Flex Duct Repair
Flex duct is the corrugated silver tubing running through ceilings and crawl spaces in most Crown Heights conversions and newer builds. It tears easily at hangers, sags where support is missing, and crimps at tight turns, and each of those problems chokes airflow to part of the home. We repair or replace damaged sections, restore proper support and slope, and make sure the inner liner isn’t crushed where it enters a register boot.

Metal Duct Repair
Metal ductwork dents, separates at seams, and can pull apart entirely at a damaged connection. Older Crown Heights buildings sometimes have original galvanized runs that have loosened at the joints after decades of heating and cooling cycles. We repair the metal itself, rejoin separated sections, and reinforce the seams so they don’t fail again the next time the system cycles hard.

Duct Insulation
Uninsulated ducts running through cold attics or unconditioned basement spaces lose heat before the air ever reaches your rooms, and in summer the reverse happens: warm air collects condensation inside the duct. We wrap and insulate exposed runs so the air arriving at your register is closer to the temperature the system intended. That’s usually where a homeowner sees the fastest change in comfort and in the utility bill.
Mastic Sealant
Mastic is a brushed-on sealant applied directly to duct seams and joints, and it’s the workhorse of duct sealing because it bonds to metal, flex collars, and plenum connections and stays put as the system expands and contracts. We use it wherever a joint needs a durable, airtight seal rather than a temporary patch. If you’ve seen tape peeling off ductwork in a basement, that’s usually what mastic correctly applied is meant to replace.
Air Leak Repair
Air leaks are the quiet tax on every HVAC system: every gap pulls in dust, humidity, and whatever’s living in the cavity around the duct. Finding them means tracing the pressure loss from the air handler outward, checking seams, boots, and penetrations where duct runs pass through walls. We repair the leaks at the source and verify the system holds pressure afterward, rather than sealing one leak and leaving three more behind it.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for Duct Repair & Sealing
Our repair and sealing work runs alongside the filtration and air quality components that sit inside residential systems around Crown Heights. We work with Honeywell filtration and control components regularly, and we know where those units gather dust and where their seals degrade after years of service. We also install and service Aprilaire air quality components, which many homeowners pair with duct sealing to keep the system cleaner long after we leave.
For heavier jobs, we use Abatement Technologies air filtration equipment so a contaminated system can be contained while we work rather than blowing debris through the home. All of the vacuum and rotary brush equipment we run is professional-grade from Nikro and Rotobrush. Whether your system has Honeywell, Aprilaire, Abatement Technologies, or any other make in it, we can help.
Signs You Need Duct Repair & Sealing Right Now
- Dust reappears within days of cleaning. If the shelves, blinds, and register grilles collect a fresh layer of dust faster than normal, air is entering the system through a leak somewhere in the duct run. The dust is coming from a cavity, not from your home, so wiping surfaces won’t fix it.
- Rooms never heat or cool evenly. A bedroom that’s consistently 5 degrees off from the rest of the apartment usually means the duct feeding it is leaking or crushed before the air arrives. Sealing or repairing that run is often the whole fix.
- Musty or dusty smell when the system kicks on. A musty odor at startup means the system is pulling air from a damp space, often a basement or a wall cavity, through a failed seal. Left alone, that pulls moisture and allergens into your living space every time the fan runs.
- Visible tears, tape, or disconnected sections. If you can see peeling tape, torn flex liner, or a duct section pulled apart in a basement or closet, it’s already leaking. A visual check of exposed runs is the fastest way to spot a problem before it spreads.
- Energy bills climbing without a matching change in use. When the bill goes up and your habits haven’t changed, the system is working harder to deliver the same comfort, and leaking ducts are a common reason. Sealing restores the airflow you’re already paying for.
Our Duct Repair & Sealing Process – Step by Step
- 1
Full system inspection and pressure check. We walk the visible duct runs, check every accessible joint and connection, and trace pressure loss back from the air handler. If the system is heavier, Abatement Technologies containment equipment keeps debris from escaping into the apartment while we work.
- 2
Document the failures. We note exactly where each leak, tear, or disconnected run is, and where the system needs new insulation, mastic, or a section replacement. You see the same list we work from, which makes the written estimate concrete rather than vague.
- 3
Clean before we seal. Sealing over dirty ducts traps the debris inside. We clean first using rotary brush and HEPA vacuum equipment from Rotobrush and Nikro, so every seam we seal is on a clean surface that holds.
- 4
Repair and seal the ductwork. Flex runs get repaired or replaced, metal seams rejoined, insulation added to exposed runs, and mastic applied wherever a durable seal is needed. We work each section until it holds, rather than taping over problems and moving on.
- 5
Verify and walk you through it. We re-check the system under pressure, run the air handler, and confirm the rooms that were failing now get air. You get before-and-after photos of your own ductwork so you can see what changed.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Crown Heights?
A typical duct sealing job in Crown Heights runs $350 to $800 depending on the number of runs and how accessible they are, and a flex duct repair or section replacement generally runs $250 to $650 depending on how much length needs replacing and where it sits. Metal duct repair tends to land between $300 and $750, and adding insulation to exposed runs usually falls in the $400 to $900 range for a standard residential system. These are estimates, not quotes; the written estimate sets the final price.
What moves the number most is access, not square footage: ducts running through finished ceilings, tight crawl spaces, or behind plaster walls take more time than exposed basement runs. System size and the number of failing connections matter too, and so does whether the job needs cleaning before repair. Larger apartments and two-family homes naturally cost more than a single-bedroom unit.
You avoid overpaying by asking for one flat price per system before work starts, never a per-vent price that grows on site. Ask exactly which runs are being sealed and see the diagnosis before you commit. Our estimates are free, the price is set per job in writing, and you get before-and-after photos of your own ducts. Call (833) 754-9186 for an exact quote. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Duct Repair & Sealing Near Crown Heights – Our Service Area
We work across Crown Heights and the surrounding neighborhoods, including East Flatbush, Prospect Heights, Bedford-Stuyvesant, Flatbush, Brownsville, Clinton Hill, Park Slope, Fort Greene, Kensington, and Bushwick. Most jobs in adjacent neighborhoods are scheduled the same week, and Crown Heights addresses are often handled the same day when the dispatch window allows. For nearby East Flatbush, see our duct repair & sealing page, and for Williamsburg see duct repair & sealing.
Serving Crown Heights, NY – Our Local Coverage Area
We serve Crown Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Duct Repair & Sealing in Crown Heights
Duct repair and sealing is the work of closing leaks, patching torn or disconnected duct runs, and insulating exposed sections so conditioned air stays inside the system. It’s the fix that makes a cleaning last, because a sealed system can’t keep pulling dust and allergens in through the same gaps. We do it in-house during the same visit as the cleaning, so you aren’t coordinating a second contractor afterward. Call (833) 754-9186 for a free estimate.
Most residential jobs take three to six hours depending on the number of failing runs and how accessible they are. A simple mastic sealing of exposed basement ductwork can finish in a couple of hours, while a job that involves replacing flex runs in a tight ceiling takes longer. We’ll give you a realistic window when we book the appointment rather than guessing.
Typical estimates in Crown Heights run $350 to $800 for sealing and $250 to $650 for flex duct repair, with metal repair and insulation landing in similar ranges depending on access and length. The written estimate sets the final price, and there’s one flat price per system rather than a per-vent charge that grows on site. Call (833) 754-9186 for an exact quote. Estimates are free.
Yes. We work with Honeywell filtration and control components and Aprilaire air quality equipment, and we can pair a repair or sealing job with filtration upgrades if that’s what the system needs. We also work with Abatement Technologies equipment for heavier containment work on heavily contaminated systems. Whether your system has any of these brands or another make entirely, we can help.
Yes, same-day scheduling is often possible in Crown Heights and the surrounding neighborhoods when the dispatch window allows. Our crews are dispatched Sunday through Friday, 7am to 7pm, and we’re closed on Saturday. Call (833) 754-9186; we answer 24/7. A call outside dispatch hours is booked into the next opening.
You get before-and-after photos of your own ductwork, not stock photos of somebody else’s system. We walk you through what was found, what was sealed, and why each repair was needed, so the invoice matches the diagnosis you saw upfront. The flat price per system agreed before work starts is the price you pay, and the local pro we connect you with is licensed and insured as their state requires.
Clear access to the duct runs and any closets, ceilings, or crawl spaces that hold the air handler. Move furniture away from register grilles and note which rooms feel too warm or too cool, since that helps us focus the inspection. If you have pets, keeping them in a separate room during the visit keeps the work moving; the same goes for anything fragile near exposed ductwork.
Schedule Your Duct Repair & Sealing Service in Crown Heights Today
Leaking ducts undo a good cleaning and quietly cost you comfort every month. Our technicians have up to 8 years of experience, use professional-grade equipment from Rotobrush, Nikro, and Abatement Technologies, and give you one flat price per system with before-and-after photos of your own ducts. Call (833) 754-9186 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Crown Heights.