Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Park Slope, NY
We provide independent Lennox service across Park Slope. What makes our Lennox work here different is that we treat the duct system and the equipment as one problem, because in Park Slope they usually are: a Lennox air handler retrofitted into a brownstone cavity with returns that were never engineered will load up, mat over, and complain long before the furnace itself fails. Our technicians have up to 8 years of experience and work on Lennox forced-air equipment regularly. We are an independent service provider, not affiliated with or authorized by Lennox. Call (833) 754-9186 for a free estimate.
Why Park Slope Residents Choose Us for Lennox Service
Lennox equipment shows up all over Park Slope, usually inside buildings that were never designed for forced air. That gap is the whole job. A Merit or Elite furnace in a basement closet, a Signature Collection air handler tucked into a ceiling soffit, a cased coil sitting in a damp rear extension: the equipment is fine, but the ductwork feeding it was retrofitted around old framing and old habits.
We know these systems well enough to know where to look first. We use OEM Lennox parts for anything safety- or control-critical, including heat exchangers, blower motors, control boards and coils, and quality aftermarket parts for filters, gaskets, mastic, flex and fittings. We’re not a dealer and we don’t steer you toward a manufacturer program. We look at your Lennox equipment and your ductwork, tell you what’s actually wrong, and set one flat price per system before any work starts. Scheduling is straightforward: call, describe what you’re seeing and smelling, and we’ll book a visit that fits.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Park Slope
These are the Lennox failure modes we run into most in Park Slope’s brownstones and row houses, and where each one tends to start:
- Merit and Elite furnaces pulling return air through undersized retrofitted returns. When a furnace was dropped into a basement that never had a return system, the blower and secondary heat exchanger load up with dust and the coil face mats over fast. In Park Slope’s four-story brownstones, that undersizing is the rule, not the exception.
- Signature Collection variable-speed air handlers fighting high static pressure. These units ramp constantly when married to tight ceiling-soffit runs and a sealed-off old return. Homeowners hear the blower hunting and blame the equipment. It’s usually the duct.
- Cased coils growing mold in damp rear-extension and basement ductwork. Humid Northeast summers push moisture into masonry cavities, and a Lennox cased coil sitting in that environment grows mold on the coil and drain pan. That’s the musty odor that seems to come from everywhere at once.
- Old Lennox heat exchangers collecting grit and rust in converted gravity-furnace cavities. Where the flue meets damp masonry, corrosion builds. A routine cleaning often surfaces cracking that needs a repair-versus-replace decision, and that decision is a safety call, not a sales call.
- Coal-chute and party-wall cavities that were never sealed. In Park Slope conversions, dust and odor complaints often trace back to a chase shared with the neighboring unit. We check the shared cavities before quoting a single-unit cleaning, because cleaning one side of a shared chase doesn’t solve anything.
Lennox Service in Park Slope: What Local Conditions Mean for Your Equipment
In Park Slope brownstones, the Lennox air handler is often jammed into a closet, a coal-chute cavity or a ceiling soffit, with returns that were never engineered in the first place. That means before any cleaning quote, a technician has to trace which runs are shared party-wall chases and which returns were sealed off during a past renovation. This is detective work, not a vacuum job. The dense mid-block stretches of 11215 and 11217 make it worse: ducts and returns sit packed tight against party walls and rear extensions, so a sealed-off return or an unsealed coal-chute cavity is easy to miss and hard to live with. Damp basement and rear-extension ductwork in these masonry buildings makes mold and musty-odor complaints seasonal, and neighbor-visible block by block. For Lennox owners specifically, that combination is what turns a routine cleaning into a repair-and-seal job: the equipment is doing what it can with a return system that was never sized for it.
Lennox Models & Products We Service in Park Slope
We service Lennox residential forced-air equipment: Merit Series gas furnaces (ML/MLV), Elite Series gas furnaces (EL/ELV), Dave Lennox Signature Collection SL-series furnaces and air handlers, and Lennox CX/CB series evaporator coils. That range covers most of what we see in Park Slope’s retrofitted brownstones and along the early-20th-century apartment buildings on Fourth and Seventh Avenues.
When a part is needed, we choose deliberately. Safety- and control-critical components get OEM Lennox parts: heat exchangers, blower motors, control boards, coils. Filters, gaskets, mastic, flex and fittings get quality aftermarket parts that fit the equipment. We’re an independent provider, so the recommendation is based on what your system needs, not on what a manufacturer program wants us to sell.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Park Slope
We price per system, not per vent and not per hour. The written estimate sets the final price, and the estimate itself is free. What drives the number in Park Slope is usually the shape of the job rather than the size of the equipment: whether the air handler is in an accessible basement closet or jammed into a ceiling soffit, how many hidden runs and shared chases a video inspection turns up, whether a sealed-off return has to be reopened, and whether duct sealing is needed to fix a static-pressure problem a cleaning alone won’t solve.
A free estimate includes a walkthrough, a look at your Lennox equipment and duct layout, and a written scope for full-system cleaning, video inspection and any duct sealing the job needs. You get before-and-after photos of your own ducts so you can see what changed. Call (833) 754-9186 to book the estimate.
Serving Park Slope, NY – Our Local Coverage Area
We serve Park Slope and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Park Slope
It’s usually both, tied together: the mold is growing on the cased coil and drain pan because the ductwork is damp, and the equipment is circulating that air through the house. Humid Northeast summers are the trigger, and masonry basements and rear extensions hold that moisture. The fix is treating the coil and drain pan and addressing the duct that keeps them wet, not just running a deodorizer. Call (833) 754-9186 for an exact quote; estimates are free.
Sometimes, but not always. Low airflow from a Lennox air handler usually points to high static pressure from tight ceiling-soffit runs or a sealed-off return, which cleaning alone won’t solve. That’s a duct sealing and right-sizing problem, and a video inspection is what tells you which it is. Call (833) 754-9186 to get an exact quote; estimates are free.
We don’t need to enter the neighbor’s unit, but we do need to know the chase is shared before we quote. In Park Slope brownstone conversions, a party-wall chase or unsealed coal-chute cavity can carry odor between units, so cleaning one side without sealing the shared cavity often doesn’t solve the complaint. We trace the run and tell you honestly whether a coordinated fix is the right call. Call (833) 754-9186 for an exact quote; estimates are free.
In most Park Slope cases, sealing and right-sizing the duct system comes first. Replacing a Merit or Elite furnace without fixing the undersized returns and unsealed cavities just moves the symptom to the new equipment, and the new blower loads up the same way. When a heat exchanger or control board needs replacing, we use OEM Lennox parts for those. The right answer depends on what a video inspection and a close look at the equipment turns up. Call (833) 754-9186 for an exact quote; estimates are free.
A video inspection catches the things you can’t see from a register: undersized returns, a return that was sealed off during a past renovation, a coal-chute cavity left open, and a party-wall chase shared with the neighboring unit. It also shows the condition of the coil face and the duct interior where humidity has done damage. That footage is what separates a real scope from a guess. Call (833) 754-9186 for an exact quote; estimates are free.
Service Areas Near Park Slope
We also work on Lennox equipment in Prospect Heights and Clinton Hill, and across Crown Heights, East Flatbush and Bedford-Stuyvesant. The building stock shifts block to block, but the pattern is familiar: retrofitted ducts, shared chases, and Lennox equipment doing more than it was sized for.
Book Your Lennox Service in Park Slope Today
If your Lennox air handler is fighting ductwork that was never built for it, we can trace the runs, video the hidden ones, clean the system and seal what’s leaking. Lennox equipment gets our full attention, and Park Slope is where we know the terrain. Call (833) 754-9186 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Crown Heights.